Rx+® Receiver

• Ultra Long RangeTM Technology
• Digital circuitry
• Low power consumption
• Power level indication at start-up (4 green LEDs, max power, 3 green LEDs correct power, 2 orange LEDs insufficient power, 1 red LED battery change required)
• Low power alarm during use. The diodes turn cyan and flash, inviting you to replace the batteries.)
• Indication of low power detectors (when a detector goes into low power alarm mode this is relayed by the receiver on the channel of the detector concerned).
• Vibrate function (thanks to the switch on the back)
• Bivvy light function (via switch on the back, see below for details)
• Anti-theft alarm
• Simplified initialization of the RX+ microns (via switch on the back)
• Color SyncTM LEDs with color recognition
• On/Off and volume control
• High-end conical speaker
• Wrist cord attachment point
• Powered by 3 AA batteries

Enhanced features over NTX-R

• Larger LED window visible on front and top of receiver
• Optional bivvy light function linked to key detection
• Stand alone unit on bivvy table or bucket lid
• Soft Grip case
• Can be synchronized up to 8 microns RX+
• More powerful radio performance
• Quiet operation mode, with all functions available but no sound

Bivvy lamp function

When the bivvy lamp function is selected via the switch on the back of the unit, the lamp will behave as follows:

• The key indicator LEDs will operate at a lower brightness to compensate for the light emitted by the lamp
• The lamp will only be activated if three keystroke detection signals are received in rapid succession, in order to prevent any false keystrokes from lighting up the lamp unexpectedly
• The lamp gradually increases in intensity until it reaches its maximum and remains lit as long as the key is pressed. It then gradually dims within 5 seconds of the alarm LEDs on the receiver going out, unless other key indications are received.